router 0
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#interf
Router(config)#interface ser
Router(config)#interface serial 0/0/0
Router(config-if)#ip add
Router(config-if)#clock rate 56000
Router(config-if)#no sh
Router(config-if)#ip add
Router(config-if)#ip address 192.168.2.1 255.255.255.252
Router(config-if)#exit
Router(config)#
Router(config)#interface fas
Router(config)#interface fastEthernet 0/0
Router(config-if)#ip add
Router(config-if)#ip address 192.168.0.1 255.255.255.0
Router(config-if)#no sh
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#router r
Router(config-router)#ver
Router(config-router)#version 2
Router(config-router)#net
Router(config-router)#network 192.168.2.0
Router(config-router)#network 192.168..0
^
% Invalid input detected at '^' marker.
Router(config-router)#network 192.168.0.0
Router(config-router)#
router 1
Router>ena
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#in
Router(config)#interface fas
Router(config)#interface fastEthernet 0/0
Router(config-if)#ip add
Router(config-if)#ip address 192.168.1.1 255.255.255.0
Router(config-if)#no sh
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#inter
Router(config)#interface ser
Router(config)#interface serial 0/0/0
Router(config-if)#ip add
Router(config-if)#ip address 192.168.2.2 255.255.255.252
Router(config-if)#no sh
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#router r
Router(config-router)#ver
Router(config-router)#version 2
Router(config-router)#net
Router(config-router)#network 192.168.2.0
Router(config-router)#network 192.168.1.0
Router(config-router)#exit
Router(config)#
sekarang ping dari Pc 0 ke Pc 1PC>ping 192.168.1.2
Pinging 192.168.1.2 with 32 bytes of data:
Reply from 192.168.1.2: bytes=32 time=94ms TTL=126
Reply from 192.168.1.2: bytes=32 time=93ms TTL=126
Reply from 192.168.1.2: bytes=32 time=94ms TTL=126
Reply from 192.168.1.2: bytes=32 time=93ms TTL=126
Ping statistics for 192.168.1.2:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 93ms, Maximum = 94ms, Average = 93ms
Perbedaan Rip v1 dgn Rip v2 adalah Rip v2 support VLSM.
January 30, 2011
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment